The de facto standard of screen creation
A Premier HMI Development Software that supports Dedicated and Open HMI (PC-based) solutions. GP-Pro EX is compatible with data in the past and has lots of functions that reduce development time.
- To update from the earlier versions (Ver. 4.00.000 to Ver. 4.08.200) to Ver. 4.09 or later, download Disc 1 in the bottom of this page, and install with a valid serial number and key code.
- Be sure to download the installation module. After downloading, start installation using the file on the computer to be installed. If a network drive is used, installation cannot be performed normally.
- This file is very large. Downloading over a slow connection will require a long time.
- This trial software does not allow transfer of the screen data which you have created to target machines (except GP4100 Series monochrome model).
- For further information (Limitations or Cautions), please see Readme at the bottom of this page.
Installation (These files are self-extracting.)
Prior to installation, be sure to close all software applications that are running.
- Double-click the downloaded file.
- The following screen will be displayed, click the checkbox of “Not Input Serial / Key Code (Limited Edition)”, and then click “Next”. (If you enter your serial / key code, the software will be fully functioned.)
- Follow the instructions given.
File Description
[Disk1 Description]
- GP-Pro EX Ver. 4.09
- Transfer Tool / Version Reverter
[Disk2 Description]
- WinGP
- Movie Converter
- GP-Viewer EX
- Camera-Viewer EX
- Data Copy Tool
- GP Remote Printer Server
- EZ Fingerprint Recognition Setting Tool
- EZ Fingerprint Recognition Unit Driver
- Pass Through
- Pro-face Converter
- Pro-face Remote HMI Server
- EZ Tower Light Driver
Download file
- Disc 1 :Soft_GPPROEX409120D1.exe 1.05 GB Last update: 2020/04/07
- Disc 2 :Soft_GPPROEX409120D2.exe 910.65 MBLast update: 2020/04/07